Glossary “continuous memory” Definition:
A continuous test of the system, conducted by the PCM whenever the vehicle is operating.
c
continuous test
Glossary “continuous test” Definition:
Portion of a Quick test where intermittent problems are recreated by wiggling wiring harnesses, tapping on sensors, etc.
continuous variable transmission (CTV)
Glossary “continuous variable transmission (CTV)” Definition:
Stepless (non-shifting) transmission that uses a sheave clutch to transmit engine torque.
continuity
Glossary “continuity” Definition:
Ease or ability of an electrical circuit or component to transfer energy from one point to another. A continuous electrical path.
continuous code
Glossary “continuous code” Definition:
A series of computer diagnostic codes that the malfunction has been detected in the past.
continuous combustion
Glossary “continuous combustion” Definition:
Constant combustion of an air/fuel mixture.
container tube
Glossary “container tube” Definition:
Shock absorber component that is used to house the internal parts.
contaminants
Glossary “contaminants” Definition:
1). Chemicals or impurities in oil or fuel that reduces its effectiveness and efficiency, such as water, carbon, acids, dust, and dirt particles. 2). Chemicals or impurities that make ambient air impure, especially those produced from the combustion process.
contaminated
Glossary “contaminated” Definition:
Term used when referring to a system that is known to contain foreign substances, such as incompatible or hazardous materials.
contamination
Glossary “contamination” Definition:
Foreign agents or particles which may be found in liquids, such as metal fillings or grindings, water, antifreeze, friction material, etc.
contact points
Glossary “contact points” Definition:
Term used for contact area or breaker points:
cont
Glossary “cont” Definition:
Acronym for Control
contact
Glossary “contact” Definition:
Current carrying parts of a relay , switch or connector that engages or disengages to open or close the associated electrical circuit.
contact area
Glossary “contact area” Definition:
Area of a member that comes into contact with another member, such as a belt to a pulley, or a tire to the ground.
contact patch
Glossary “contact patch” Definition:
Area of contact of a tire with the road surface when the tire is supporting the vehicle weight.
constant volume sampling (CVS)
Glossary “constant volume sampling (CVS)” Definition:
Emissions sampling method which captures all of the exhaust gases from the test vehicle and combines them with a certain amount of outside air. A venturi is used to ensure that a constant flow (fixed volume) of exhaust and air flows through the sampling system.
consume
Glossary “consume” Definition:
To use up. To absorb.
consumption
Glossary “consumption” Definition:
Term most generally used when referring to fuel consumption.
constant mesh
Glossary “constant mesh” Definition:
Gears that mesh continually, such as a planetary gear, eliminating the clashing or grinding that may occur when other types of gears are shifted together.
constant mesh transmission
Glossary “constant mesh transmission” Definition:
A transmission in which the gears are engaged at all times and shifts are made by sliding collars, clutches, or other means to connect the gears to the output shaft.